Some Windows users are experiencing a strange problem. After installing Windows 10 or Windows 8.1, they observed that their device was showing ‘’ error in status and they couldn’t access the internet until re-connected.
I realized this is a common issue with Windows 8.1. In some cases, even resetting the device and starting over didn’t help. After following some forums, I thought of giving some suggestions, one of which I found on Answers.
this instruction is only for intel only. so if your adapter not intel please use another instruction
first turn your wifi on and than
Open an admin-level command prompt in Desktop mode, type the following commands, and hit Enter after each command:
than type this commad line by line and than enter
netsh int tcp set heuristics disabled netsh int tcp set global autotuninglevel=disabled netsh int tcp set global rss=enabled
Then type the following and hit Enter, to verify that practically all the settings are disabled.
netsh int tcp show global
Finally, reboot your machine and see if this helps. If it doesn’t help, you could also try the built-in Hardware and Devices troubleshooter and see if it helps. This post will show you how to troubleshoot if your .
0 komentar:
Posting Komentar
Silahkan Tinggalkan Komentar Anda